Good afternoon! So I have taken a hiatus from my vintage machines for about 1/2 a year. I decided to fire up the old machines last night in preparation for the two newest members (soon to be) of the family--a Commodore Amiga and an Atari Lynx console. When I plugged up my Performa 6360, it...
Hey guys,
I have a flyback on an analog board with a cap that’s no good. The little prongs that go in the CRT have been damaged but they don’t seem to be removable. I think I have to replace the entire cap. Is it possible to replace the cap and wire?
Please let me know if you can provide...
When I launched Internet Explorer, it was trying; to get to a live.apple page and I was getting a security error. When I tried Macintoshgarden.org, it worked. Can't get it to work in Os 7.6 though.
Okay I got a little closer. I did some internet research and read that this card needs the Enet driver. I don’t think I saw that in my OS 8.1 installer so I grabbed it out of an 8.5 disk. When I added the Enet extension, Ethernet shows up in TCP/IP settings. But not much else. Not sure what...
Yeah it's defintely PCI. I have a Hackintosh that I'm running OS X on as well as an iMac G4. Not sure if either of those would run that card. Maybe it's not compatible?
Hey guys,
I recently picked up an Apple 10/100 Base T ethernet card and I popped it in my Performa 6360 in the hopes of connecting the machine to the internet. No dice. I tried in OS 7.6 and 8.1. I did FULL install of the system software for both 7.6 and 8.1 in the hopes that it would...
I have a bad flyback on the analog board for a 128k, 512k, Plus. Would a flyback pulled from a working Mac SE analog board work for this or do I need to find one specifically for the 128k/512k/Plus board?
Hey guys. My Mac Plus has started failing to boot. I get an address error.
Right now I have 4MB RAM and I have a Rominator installed on the logic board.
If I try to boot from the Rominator, it just gives me a floppy disk with a question mark. If I try to boot from a 6.0.8 disk on my...
Ah, turns out I haven't been using an .ini file. I guess I have been going with the defaults. If I download the attached, ReinsertCDOnInquiry is already 1. Should I try to use that?
https://raw.githubusercontent.com/ZuluSCSI/ZuluSCSI-firmware/main/zuluscsi.ini
Hey guys. I just picked up an eMac that won't power on. I power it on, the CRT makes some noise but nothing else happens. I'm thinking this thing needs a recap? I have never worked on an eMac. Where would you recommend I start?
Hello again! I did update the firmware—thank you for the instructions. I still seem to be experiencing one strange quirk but only with CD images. Some of the time, the CD images won’t mount. However, when I power down the machine, take the sd card out and slide it back in and reboot, the...