Search results

I used one of those janky ebay CF>IDE adapters in my B&W, with a bit of finagling. It wouldn't work set to master or slave, but CS worked. It's on the primary IDE by itself and a DVDRW is on the secondary IDE by itself. DVDRW is set to CS as well. I was able to install Jaguar & Tiger from CD no...

put an RC2014 in it :) https://rc2014.co.uk/

I'm always interested in your projects so I'm definitely following to see where this takes you!

hmm, I put my superdrive into an 800k housing too, and you know what? the SE it came from won't boot with it connected externally. I doubt it but maybe the cable in the housing is wired differently than the internal connector? Strange coincidence.

I added 2 additional models to the quadra files based on a twitter comment, I present the iici version along with it's button insert! Uses the same lid and fan holder as the q700 model. https://www.dropbox.com/s/tgif4inyhqzsggj/MicroQuadra700.zip?dl=0

That looks amazing! Well done!

Just thought about this thread watching the latest Computer Clan video - and it looks like the prototype G3 imac doesn't have the unpopulated floppy pins, but does have and ADB connector on board Thought it was funny that they added the floppy port on a later revision if it indeed was not there. :)

awesome, thanks!

What size fan is this for? 80mm? I might give it a shot. My SE has a 80mm fan and part of a PC PSU shell for a mounting bracket. Kind of shotty looking on the inside. I also (regretably) removed the shroud from the back case

You might need to put the STL in a zip file, but you should be able to upload it here:

Doesn't seem like there is much room for additions on the board layout, but I'd imagine baking in a modified mac plus> PS/2 keyboard adapter (http://www.synack.net/~bbraun/mackbd/index.html thanks to @bbraun) would be a welcome addition!

This is like deciding to stop working on cars because you lost the maintenance receipts... Can't say I understand but do whatever you feel is best man.

re-subscribing, very much looking forward to this project!

That looks awesome! I can't wait to try printing it out! Do you have a link to the screen you built this around? Thanks! Mark

That is awesome! I'm so happy to see it all in white! The feet look so much better matched like that. The SD door is a great addition to the project! I will have to print one myself, but it will be red until its warm enough out to paint!! Thank you for sharing the STL file!

they should hold it together! It’s not the most snug fit but it worked when I printed them! That looks awesome! I am glad to see the mounting holes worked! I didn’t have a chance to reprint after adding them (i drilled mine)

that's amazing!! I still haven't figured out a solution to keep the lid on if you stand it vertically, mine are spray painted since I had blue/black/red filament, but I also have this little stand (with feets!) that can help too. I thought about hot gluing magnets inside but haven't gotten...

I never knew you couldn't download the models from P3D because I don't have a pro account! :-O Thanks to @Aladds for pointing this out! Here are the STL files in a zip file, also linked to my drop box in case this upload isn't allowed...