I may argue that you probably don't need the driver files for a particularly unknown rare Japanese Nubus graphics card if you're running an emulator...
The files that @cheesestraws kindly provided work fine.
You want an ADK, known as the 'AppleDesign Keyboard', rather than the much more worthwhile AEK. Luckily, ADKs are the cheap ones on eBay as there's millions of the things out there and people would rather have the better AEK/AEK2 anyway.
I know it was over a year ago, but commenting here because I had the exact same problem with a Pickles 24AW (green screen, everything shifted sideways). The problem occurred with two different VGA adapters, a generic 6-DIP one and a Unimac 82D (with 16 switches). Solved it by getting a 10-switch...
Yeah, the Astec/Delta PSUs in these things are hit or miss at this age. You'll either be lucky and get a working one, or it'll be dead. Or extremely unlucky and it'll explode whilst in use. Although at this point that happening means you'll join the club.
The Quadra 650 and 800 boards are...
Hey Paul,
Have a look at the power button on the back panel next to the video output port. If it's stuck in, rotate it 90 degrees with a fingernail and it should pop out again. This'll let you fire up the machine without a keyboard attached.
No, only way of going back to 1-bit would be to rip out the card, harness, and neckboard and put the original stuff back in. Bolle told me why but I'm not clever enough to understand.
I won't say how much I paid in case Bolle wants to adjust the pricing in future. But I will say that whilst not cheap, it's worth it for the fact that it's a limited production, hand-made card. Plus, Bolle deserves to be compensated for all the time reverse-engineering and developing it in the...
Is the PSU connector in the same place as the Q650/800 boards? I've got a Q650 in my Q700 case and the PSU slots directly into the same place it would with the Q700 board.
Nope. Apple did all sorts of weird things in this period. Using up older cases before transitioning to a newer design for the same model was one of them.
Edit: Also the only difference between the 475 and the earlier LCs was the logic board, everything else is interchangeable. Not really much...
A couple of machines have showed up in the last couple of weeks due to being on eBay for very reasonable prices.
First up the Quadra 650, a machine I personally consider incredibly underrated and perhaps the best Quadra, all things considered. This one came with a Formac ProLegend GA...
I got these made in PA12 nylon (I don't have 3d printing facilities myself) and can highly recommend. They fit perfectly, snug so they won't fall off but still removable to get into the machine.