Search results

Hello guys. I had to remove the motherboard in a IIe to address the corrosion below it. Unfortunately some of the plastic standoffs were very brittle and crumbled away. Where can I get replacements? I saw that they are sold at...

Hello guys. I recently found a 33 MHz formac accelerator card in an old Macintosh LC. Fortunately the hard drive (Quantum) was still working and I got everything off it before it failed :( . Among other things I found a Control Panel file called "ProCPU_V1.06". I searched the 68kmla to get a...

Hello folks, I just got me a very cheap Macintosh LC from the bay. Battery didn't explode fortunately and capacitors only leaked slightly. Has got a very nice Accelerator Card with 68030 and 68882 FPU in the PDS slot. I cleaned everything thorougly with water, soap and isopropyl alcohol after...

What do you guys do about scratched/broken apple logos on Macs?

I recently got 2 Macintosh SE (lets call them A and B). A is a Macintosh SE 1/20 from 1987 and B is a SE FDHD. Macintosh B had a broken CRT where air got inside. So I replaced the CRT today but there is some flickering going on (moving thin horizontal lines.) Even worse when I placed both SE...

Hello folks, I just  acquired my first pre 2000 Macintosh (Macintosh SE FDHD) and noticed a nasty problem with the case. Two plastic spacers connecting the metal cage to the front casing are broken off. It looks like the owner used the wrong type of screws at some point or dropped it. So I...