Search results

Yes I ever recapped a duo board (can’t remember which) and it exploded twice, the 3rd time I soldered the caps in and I did not power up, I gave the board a wash and it works thereafter. There could be still flux underneath certain chips or caps I guess.

Watched, ok where do I get hold of one? Hehe

Hi nope, I think it could be my board. I removed some caps and re soldered but this time it does not chime anymore.

Hi let me check, it should be available.

I tried on 7.5.3 and it works anyway.

Did you copy ColorDesk into Control Panel folder? Then it should work

All My Macs works with ColorDesk. The trick is to get the correct .PICT file. I used online converter to convert JPEGs to PICT.

yup I thought of it too, use something to push it in, since I don’t have a drive for my SE/30

But functionality wise it should read and write right?

But reading it again it seems able to work, since a manual inject works on Mac IIsi.

Oh nice to know and thank you so much.

Hi, as the title says, my SE/30 does not come with a floppy drive, I have a spare drive from 6100 and can I use it?

Hi! I’ve got the exact same problem after recapping my M5126. Try the below methods cos it works for me. 1. make sure your logic board isn’t touching the base of the case due to slight bent. So also make sure your axial caps aren’t too big to cause the board to bend. 2. check both sides of...

Great! Nice to “see” you here. Indeed that’s gonna give some hope and help to many of us here.

Check out this video, seems like baking the LCD panel only with 85deg Celsius for 9 hours did help.

After buzzing all 32 pieces of rams they are no issues. Sadly it’s still shows 0000 0003 0000 FFFF when starts

If I’m not wrong the following adapter are pretty much the same voltage and connector PowerBook 3400c PowerBook 2400c PowerBook Duos iBook G3 Clamshells

Ok sure

Wow thanks mate! This should keep me busy for the coming weekend. If all fails are u keen to buy? Shoot me a PM. It’s recapped but just the sad Mac M5120. I’ve got another M5126 which I’ve recapped and restored working well, I’ll just keep that will do.

Ahh good way to try too. Doesn’t hurt to buzz around connectivity, rather than changing them blind.