Hello
I just recapped a NOS Mac SE/30 logic board. It was working but the caps started to leak so I did the recap. Sound seemed fine before but was a little low. After the recap the sound works and is now louder, but now I notice a thud/click sound at times. Other times the sound plays fine...
Thanks for the drivers, I was able to get my Crescendo L2 300MHz L2 card working on my PowerMac 6400 with MacOS 9.1. The disk that came with it did not work (must be for older OS), but I will post it on here if anyone wants it. 1.4.2
This is the way I do it! But I don't even bother dismantling the units! I have even done keyboards this way. Be careful not to have too much on the brush so it doesn't leak inside the case or keys. Just a light think film is sufficient. Works great! Make sure to wipe it down after with...
I got a older Powerbook 1400c for this sole purpose. So I can copy older Mac games to 800k disks. The nice thing is I can even go online with it and download the games from Macintosh Garden directly. But it also has a CD-ROM on it too. And it's built in disk drive can handle 800k and 1.44MB...
I have the same issue and found out I have a burned transistor at DD1. Take out the Analog board and inspect it.
https://68kmla.org/forums/index.php?/topic/54678-burned-transistor-on-cc-analog-board/
I have a burned transistor on my CC Analog Board! It happened after using a Logic board that was recapped. The system booted up with no sound and I started to smell something burning. The smell got stronger and stronger and I turned it off. Inspected the Logic board and it looked ok. But...
Very common issue on the SE/30. Recap the board. If you are lucky everything will work. I have 3 SE/30's. 1 was dead like yours, 1 worked with no sound and the 3rd was working. I recapped all 3 and got two to work 100% and the one with no sound stil has no sound. All had lots of leakage...
I have two Color Classics that needed recaps. Both original logic boards. They were both dead. I did the Mystic upgrade on one and it was working. After recaps on the two original CC analog boards, only one works. Had no sound and after a few min I smelled something burning so I turn off...
Magic eraser can help fix that better than sand paper. The best method I have found is to use 40 volume clear conditioner and a small brush. No need to dismantle the computer either. Apply thin coats and leave it in the hot sun! Reapply with the brush every 15-20 min for several hours! Yes...