Search results

cool !

A 060 accelerator for the Mac could be awesome, on my Amiga 1200 using my 68060@100 mhz accelerator, the fusion emulator beats the early PowerPC Macs with no problem using the speed test.

Hi got the program resource miner, loaded the included 7.6.1 patch then select the system suitcase but when apply got several conflicts like the one in the picture. If I choose to "apply to all further conflicts" and "overwrite" the result is a nonworking system folder that stuck on the happy...

cool, this is a great control panel, thanks !.

Please pretty please :D

Are you usinga modern monitor ?, maybe don't like the screen mode.

Could love to thanks !.

Recently got tired of using the MAC-VGA adapter on my PowerMac 9600 my voodoo 1 already added a lot of cable clutter, so purchased one of the non-OEM twin turbo cards that have the VGA output on it. Then when I placed it next to my OEM apple card (the one that is included factory on the 9600)...

Hi, in the past got good success flashing a 3dfx voodoo 3 using the mac firmware, and worked great, but lately started to show artifacts from bad ram. So also I got a pc 3dfx voodoo banshee 16megs AGP, and was thinking if is possible to flash it for mac. Searched for flashing a banshee to mac...

Hi any guides on how to use this ?.

https://mega.nz/file/0o1BBAjC#9_LgRMqs_tWom5b2ACy78Nl4Vv1jNs3flBRUBoqh34Y Contacted the author can be downloaded from here now :

This is very cool, but don't get how this works?. What I need to do to get system 7.6.1 patched ?.

Look some of your VRAM Simms are bad, i have exactly this issue a few days ago. The screen looked very similar to your capture. Are you interleaving the Simms correctly ?, also you tried only adding 2 Simms and swapping them to check for a bad one ?.

Hi guys, From this thread: https://68kmla.org/bb/index.php?threads/1920x1080-on-pm8500-built-in-twi... Does someone have a copy of these files ?. http://blargg.8bitalley.com/parodius/mac/CustomGraphicsDriver.sit http://blargg.8bitalley.com/parodius/mac/Custom_TwinTurbo9600_Driver.sit They...

In my case the first thing i have done is do a deep clean of the board hot water and brush cleaned using ipa also closely to the caps, and checked near legs to caps for continuity. Will recheck everything and add some pictures of the board in case someone else can see something. One thing...

Thanks for the info, so you already where all over the same issue.Will try to source a new motherboard on eBAY. Also i see there's the solder pads for a ROM SIMM, there's any alternative ROM SIMMs for this macs ?, that could be something interesting to try.

Hi guys, a couple of weeks ago purchased a centris 610, so i can get again into the 68K mac thingy, and it worked for like a week fine but now mysteriously died on me . I was installing some games and stuff and when rebooted i got the power up chimes and then imminently the Death chime. So i...

Hi i like to know if possible to connect an internal macintosh 3.5 superdrive to the apple IIgs. Also if this is possible if somebody have a guide or pinouts to do this.

Following this guide i used the color sheme http://www.xlr8yourmac.com/systems/MacinPC_ATX_case/pages/PC-MAC_PS_pinouts.htm so i connected all red wires to +5 all black to gnd blue -12 orange to +12 yellow to +5 TRKL (says must be to +5 to the mac to power on) On the atx side (green +...

Thanks mac drone that was what i need i try to figure the voltage from the quadra 840 pinout it have a cable coloring to voltage relation. If i get the quadra board working i will post the voltage pinout :D