Search results

Try rubbing the spot firmly with your finger, 70% of the time you can eliminate most of the discoloration

This is not a converter, its a breakout board. On one end is the elusive TMDS connector that Apple uses on the motherboard of all the G4 sunflower macs. On the other end is the HDMI connector In between are pins that you interconnect to make it work. Correct yu do not need to cut the end off the...

They are now available https://www.tindie.com/products/stillwell/hdmi-to-tmds-breakout-board-2/

Seems to be a lot of folks wanting to re-use the Sunflower G4s, hooking up outside video, replacing the guts with an M1 Mac mini etc, I thought I'd create a breakout board where you could pluck the video plug off the mother board, plug it into the breakout board and route the signals using lots...

Besides the DC power supply I have a spare of most every part in that printer (all work) so if you need stuff let me know and for the cost of freight I can send you a care package and you just send back what you don't need. I know I have: AC Power block AC Fan HV Power supply I think I have a...

Wow that would be wonderful thanks!

Any luck grabbing that G4 screen?

VERY Helpful thanks so much!!!

Its 12 screws, three on each side

This is not my auction, but this is likely what you need: https://www.ebay.com/itm/145272028763 Having refurbed a bunch of these, this component is bad 80% of the time.

You are a fine gentlemen thank you! There are like 6 screws around the screen as I recall,

Ok how about this, Are replacement screens available for this unit?

Hello, I just recently aquired this unit: iMac G4/700 (Flat Panel) 700 MHz PowerPC 7441 (G4) M6498 (EMC 1873) Besides some pixel cancer it is on very good shape. Several questions, Safari is totally useless on this unit in 2024 I've tried downloading other browsers put the code on a USB...

In about a week I will have a spare Laserwriter IIg printer ready for sale. I have refurbed the entire thing, works great, the only thing you'll need is a toner cart (not shipping those they just make a mess) If you are in the continental US reach out.

Well the good news is that after an evening soak in WD40 for the roller shown below all is well and everything works great. The roller and the rubber grommet are original to the unit, I know this because it has never been opened (screws still covered by product sticker.)

It arrived and it works.... sort of. As you know there are three rollers inside, and X and a Y axis and then there is a third that sits at about 7 oclock. It seems to not want to turn, it is inside two rubber grommets and Im wondering if its supposed to spin freely because it seems locke dup...

Yes I have to sell the spares to recover all the flipping cash I paid for them and the repairs LOL

Is this one? https://www.ebay.com/itm/354906186370

Really? Never seen one on Ebay, etc. If you have a link I'd love one!!!

replacing all the SMT caps has resurrected them. Now I have 3 working Laserwriter IIg boards