Search results

Absolutely, the 1.2mm thickness is essential :) I just noticed that I have the KM41C16000CK, not the KM41C16000BK. The only difference seems to be that the BK version is 50ns, while the CK is 60ns. Since the IIfx can handle RAM up to 80ns, there shouldn’t be any issue.

@dougg3 Thank you for your response. I don’t recommend Garrett’s Workshop RAM because it has capacitors positioned right behind the slot clips, making it difficult to attach. Thanks again for sharing the Gerber files so the community can benefit from them.

Hi guys, I recently got my hands on some KM41C16000CK-6 chips. That's enough to build about 64mb of ram. Can anyone help me find the Geber files for the Doug Brown simms? Thanks a lot in advance

Hi everyone, any news on these drivers?

Thanks, as soon as I have the drivers I will try to check if everything is working properly 🤞

Thank you so much!! Let me know if you find something.

Hi guys, I got my old powermac 9500 up and running again with a Truevision TARGA 2000 pro PCI card for video capture. I can no longer find the CD with the Truevision software with the drivers and control panel for configuration. Does anyone have an iso image of this software or a copy of its...

At the beginning the card generated a wobbly image which was stabilized by touching the R39 resistor. Now she is completely dead. There was a moment that generated something by holding down the IC. I reworked all the soldering and checked the traces... I probably damaged the IC further by doing...

From a quick check it seems to me that the pinout is not compatible. I don't know if it's because one chip is clk-02 and the other clk-03. But anyway it's a starting point...

Yes the U24, not the U26...

Hi guys, I've a faulty 8*24 PDQ, provably is something around U24 or the U24 itself. I can't find anything about this card: schematics, parts list and so on... The IC is a clk-02 9146 (see the photos), but I dont know what it is. Maybe a clock buffer but I dont know. Any help ? Thank you so much