Search results

  1. PiperTheGreat

    SCSI drive does not spin up - LC475

    Ahh, I'll take that under advisement :) I will most likely be doing away with the mechanical storage anyways, and possible going with a RaSCSI, I've seen some of the mad things they can do :) Thanks for all your help, and that goes for everyone on this thread too :)
  2. PiperTheGreat

    SCSI drive does not spin up - LC475

    Yeah, I actually cracked this a little later on. This was actually a twofold problem. There were Termination issues. The jumpers on the drive adapter were stopping it from spinning up, that was one thing. Later I found just plugging in the optical drive even while not powered on, suddenly made...
  3. PiperTheGreat

    SCSI drive does not spin up - LC475

    Ok, so update. A few things are now known. The drive has jumpers, but they are on the bottom of the drive, but none of them was populated, one set of pins says Enable Motor Start, but none of these may be the problem I have attached the adapter that I was using, this was the config it already...
  4. PiperTheGreat

    SCSI drive does not spin up - LC475

    Hi all, First post on here, didn't know where else to come really I am upgrading an LC/Performa 475 for a video I'm making, and I have run into a little bit of a problem with the new hard drive I installed an old Seagate 4GB SCSI drive, one of those that is 80 pins, I use an adapter with it...
Top