Search results

Sadly that didn’t fix the issue.

Have you tested the fuse? Funnily I have a Mac Classic analog board that does the exact same thing. Just died out of nowhere one day. I also recapped it and haven't gotten it working.

Sorry, what I meant was I tedted another working logic board in the case and it worked. It’s a logic board issue.

I have a Mac 128k board (later revision) that chimes but has no screen. I’ve confirmed this isn’t an analog board issue with another working board. What could be the issue? I’ve seen some people say the RAM muxes, how do I test for that? Where even are those? Not sure what to do here. The board...

Hello everyone, I have a CC board that I've recapped and cleaned. When I try and boot, it turns on with no chime and no mouse pointer, just gets stuck at the grey screen. There's no floppy activity either. I heard this could be the EGRET or the small chip next to it, but I removed and cleaned...

Did you get it fixed? Mine does the same thing, I desoldered the Egret chip. Grey screen with no pointer.

Bad speaker? See if there's sound coming from the headphone jack.

Ok so I tested the PowerMac 7100 power supply inside my IIci, and it does indeed work fine. Thank you everyone!

Yes, but I saw that there are 2 options, one for the IIci and one for the 7100. One is 108W and the other is 112W, for the IIci and 7100 respectively. Should I test it out? Will the 4 extra W hurt the computer?

Does anyone know how close these are to completion? I need a IIci power supply and an LC. Thank you!

Hi, I have a IIci with what I think is a dead PSU (no power, completely dead) and I need to either recap it or get a new power supply. It just so happens that I have a PowerMac 7100, and according to this website...

I already recapped it.

I picked up a Mac Classic which didn't work. Logic board has been recapped and works in a different case, but the analog board doesn't do anything. No fan spin, crt, nothing. I did a full recap on the analog board, which took me 6 hours and was really frustrated that it still didn't work...

Did you find it? My cube cd drive doesn’t work either.

All of the dead TDK Psu's I've recapped still don't work. They just click click click. The only time Ive gotten a recap to work on these was when they were still working.

I recently picked up a Macintosh Classic from Craigslist, which looked to be in super good condition. Case was really white, mouse looked to be like new. The only= thing was, it didn't work. When I asked about it, I fully expected it to be blown up and destroyed by a Maxell bomb. But he...

Is this the same gear used in the Applecd300 and 600? If so this is great, because I haven't found any replacements. My drives haven't broken yet, but it's just a matter of time.