• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Search results

  1. dramirez

    TashRecorder: a Farallon MacRecorder compatible clone

    Your skills and love for the vintage Macs are simply amazing! @tashtari
  2. dramirez

    ZuluSCSI won't boot with Macintosh Plus

    Is this the same as? System="MacPlus" I was playing with a Mini in my Portable, wouldn't boot (sas Mac) until I added this to the .ini!
  3. dramirez

    Yet another dead(?) Power Mac 9600/300

    Are the SCSI buses terminated? I read recently that the 8600/9600 don't boot when the buses are not correctly terminated, if you disconnect the buses they are not terminated...
  4. dramirez

    Rodime SCSI drive from SE30 ROM Help!

    I was mistaken, my drives are Miniscribes, not Rodime!
  5. dramirez

    Rodime SCSI drive from SE30 ROM Help!

    How can you tell the ROM is damaged? I might have a drive like this, I'll take a look tomorrow.
  6. dramirez

    What's the difference between the various Radius 24 cards?

    Thank you @eharmon!
  7. dramirez

    Archive A/UX hard drive from a IIfx

    Exactly, ZuluSCSI supported it first. I used it to clone the SCSI hard drive inside my NeXT Cube.
  8. dramirez

    What's the difference between the various Radius 24 cards?

    @Phipli: Seems like you could have all the answers! I have an PrecisionColor 24Xk Series card (632-0187-03 Rev. B2), with 3MB VRAM, 80 MHz DAC, the ROM label says 295-0070-03-REVA V2.0. I'm planning on using in my Quadra 700 with a PPC card. If I understand correctly the best performance, I...
  9. dramirez

    Quadra 700 16MB 30-pin SIMMs

    MemoryMasters @eBay
  10. dramirez

    Jailbreaking the Radius PrecisionColor 24XP . . .

    @trag Did you do it? Can you tell us your results? ;)
  11. dramirez

    Macintosh Portable Feet Remake

    That would be sweet! I'll buy a complete set.
  12. dramirez

    Macintosh SE PSU 820-0385-A R309 Value

    https://68kmla.org/bb/index.php?threads/se-30-power-supply-recap-or-atx.31107/page-3
  13. dramirez

    Clock doesn't work in Quadra 700

    No, I didn't check for the 1Hz signal, I will. Then I'll do the plastic tip trick. I guess I could do a little retouch on every pin near the RTC. Thanks for the tips guys.
  14. dramirez

    Looking for anyone who has a Zulu SCSI and Quadra 700

    https://github.com/ZuluSCSI/ZuluSCSI-firmware/issues/385
  15. dramirez

    Clock doesn't work in Quadra 700

    <a spam message was originally quoted here> It does, so the RTC may be working correctly. I tried Snooper 2.0, and funny thing happens, when the Clock test it's running my clock gains 6 seconds which it's the time the test takes to run, every time I run the test I gain 6 secs... I opened the...
  16. dramirez

    Clock doesn't work in Quadra 700

    Clean 7.1 install using SuperClock 4.0.4, same issue.
Top