• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Search results

  1. ironborn65

    PowerMac 6100, Performa 450 , Mac IIsi

    thanks for the suggestion > HDI-45 adapter is not too hard to find on eBay indeed, but it's quite expensive, more than what I paid for the Mac itself
  2. ironborn65

    PowerMac 6100, Performa 450 , Mac IIsi

    yeap, but it was added on top for free. :)
  3. ironborn65

    jmacz journey

    Hi @jmacz , I add the NPN transistor for the startup signal to PSUs but not using that nice PCB of yours, I simply arrage resistors and the NPN in a manually cut board, wrapper with a heat shrinkable and left inside, but I prefer your arrangement, very clean an neat. Where did you get the tiny...
  4. ironborn65

    PowerMac 6100, Performa 450 , Mac IIsi

    Hi everyone, say hallo to the new babies, welcome! The PowerMac is working but it was not provided with the video connector :( The Performa 450 is silent even if the fan spins, PSU to test + MB to be recapped The Mac IIsi cold & dark ;), PSU to be tested and a recapped. NuBus adapter present...
  5. ironborn65

    Netatalk 2.3.0 available

    good, so does it mean that autodiscovery of afp servers is supposed to work in my Synology? because it does not
  6. ironborn65

    Netatalk 2.3.0 available

    copy & paste my contribution: pierino23@nas2:/$ uname -srm Linux 4.4.180+ x86_64 for Synology DSM 7.1.1-42962 Update 6 dont' ask me what it means :)
  7. ironborn65

    Netatalk 2.3.0 available

    I'm not a networking expert, I can only paste the response of a Synology support ticket I opened a while ago "Thank you for your patience. DSM uses Netatalk-3.1.12. AFP protocol version supported: 2.2 3.0 3.1 3.2 3.3 3.4 Open-source Netatalk removed AppleTalk since Netatalk-3.0. Therefore, DSM...
  8. ironborn65

    Netatalk 2.3.0 available

    DSM uses Netatalk-3.1.12. AFP protocol version supported: 2.2 3.0 3.1 3.2 3.3 3.4 Open-source Netatalk removed AppleTalk since Netatalk-3.0, therefore, DSM does not support DDP. I have the need to install netatalk 2.1 still there is no support for autodiscovery, I have to type in the IP of the...
  9. ironborn65

    Netatalk 2.3.0 available

    done, it's now successfully started and serving shared folder FYI, log is attached INSECURE_AUTH was used for Synology DSM 7.1.1 the network name used is eth0 it might help others Thanks for following me on this
  10. ironborn65

    Netatalk 2.3.0 available

    ok, right, thanks. Given NAS terminal ifconfig: docker0 Link encap:Ethernet HWaddr 02:42:4D:35:FC:2B inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0 inet6 addr: fe80::42:4dff:fe35:fc2b/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1...
  11. ironborn65

    Netatalk 2.3.0 available

    Hi @slipperygrey the netatalk/netatalk2:test process does not start, I can see it from ps -ax When adding the new parameter INSECURE_AUTH the netatalk process starts as expected, but it stops just after: *** Removing old locks stdout 09:46:01 *** Starting AppleTalk services (this...
  12. ironborn65

    Netatalk 2.3.0 available

    Hi mate and thanks. Sorry for being late with the test. But nope, it still does not work. root@netatalk-netatalk21:/mnt/afpshare# ps -ax PID TTY STAT TIME COMMAND...
  13. ironborn65

    Netatalk 2.3.0 available

    FYI Synology 218+ , docker version Client: Version: 20.10.3 API version: 1.41 Go version: go1.17.1 Git commit: 55f0773 Built: Thu Jul 21 10:23:46 2022 OS/Arch: linux/amd64 Context: default Experimental: true
  14. ironborn65

    Netatalk 2.3.0 available

    Hi, nope; I've started and re-created the container several times from a clean environment. In any case the execution of the docker entrypoint does not depend on the host, it's self contained. netatalk process never started in v2.1 The v3.1 container has not "ps" installed, I don't find the...
  15. ironborn65

    Netatalk 2.3.0 available

    fine, thanks. So I tried with v2.1 but the server does not respond in MacOS and System 7.5.3 ps -ax in the container show only: root@netatalk-netatalk21:/mnt/afpshare# ps -ax PID TTY STAT TIME COMMAND...
  16. ironborn65

    Netatalk 2.3.0 available

    thanks. instead of the MANUAL_CONFIG you can map the config file in another mapped Volume, as such it will be persistent. No need to add another parameter to the run script volumes: - "./AppleVolumes.default: /usr/etc/netatalk/AppleVolumes.default" It's a best practise to map config files to...
  17. ironborn65

    Netatalk 2.3.0 available

    thanks but I was reporting the behaviour "from Basilisk II + System 7.5.3 +" anyhow it was helpful:
  18. ironborn65

    Netatalk 2.3.0 available

  19. ironborn65

    Netatalk 2.3.0 available

    TattleTech reports: ◊ AppleShare Client is Present = Yes + AppleShare Client is Running = Yes + AppleShare Client Version = [Unknown] Any other way I can check the version?
  20. ironborn65

    Netatalk 2.3.0 available

    when working with the modern MacOS: I must map my shared NAS folder to /mnt/afpshare, otherwise it does not work. In fact I can find the files in the container, in root@netatalk-netatalk31:/mnt/afpshare# and the MacOS correctly sees it when "Connect to Server...". If I try to map a different...
Top