• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Search results

  1. M

    Not quite yet, ned to verify this version of the PCB works, once I have done that they will be...

    Not quite yet, ned to verify this version of the PCB works, once I have done that they will be going on GitHub :)
  2. M

    yep

    yep
  3. M

    More new shiny things: [ATTACH]

    More new shiny things:
  4. M

    Recreateing the Apple TechStep

    Unfortunately I am no longer selling these in kit form, Although I know lots of people like kits I found the ones of these I sold in kit form required allot of support during assembly and remote debugging afterwards which I just don't have the time to do. Going forward I am only going to be...
  5. M

    Well if someone wants to donate a LC PDS video card to the cause! :ROFLMAO: Adding multiple...

    Well if someone wants to donate a LC PDS video card to the cause! :ROFLMAO: Adding multiple PDS cards gets a bit more complicated as you have to handle card selection, smooshing one card and a accelerator together is much easier as the accelerator is not really a PDS card. Maybe I need to get...
  6. M

    New shiny thing in testing: [ATTACH]

    New shiny thing in testing:
  7. M

    Building PCB in Europe is soooo expensive...

    Yep. I have looked many, many times as getting PCB's produced in Europe and it;s just uneconomical for hobbiest level stuff. One IIcx board would cost me about 2-3x the total cost of 5 of them shipped from JLC last time I looked. And that's assembly Even among Chinese manufacturers JLC tends to...
  8. M

    Cloning the Farallon MacRecorder

    Wasn't me, I haven't even heard of it :)
  9. M

    Macintosh IIci Logicboard recreation

    Boards are on order! I have ordered 30 boards, all with the bottom side birdseed populated. Boards are purple with a ENIG finish The good news is that although the order as a hole was pretty expensive the per board cost is actually lower than I expected so it's looking like the final price will...
  10. M

    Revisions done, will give it one final once over tomorrow evening then send it to JLC :) [ATTACH]

    Revisions done, will give it one final once over tomorrow evening then send it to JLC :)
  11. M

    Very likely they will be remarked 15ns parts. At least that is what the last batch of 10ns ones...

    Very likely they will be remarked 15ns parts. At least that is what the last batch of 10ns ones I brought from them seemed to be. Still real 71B74's though so are usable on designs that tolerate slower parts
  12. M

    Yeah the TAG SRAM's are a pain, UTSource has them but you will get 15ns parts no matter what...

    Yeah the TAG SRAM's are a pain, UTSource has them but you will get 15ns parts no matter what speed grade you order (and they will remark them so watch out) Quest has genuine 12ns ones (or at least they did) but they are not cheap
  13. M

    Yep :) Combind ST-Nic based ethernet card and accelerator for the LC II / CC. Will probably do...

    Yep :) Combind ST-Nic based ethernet card and accelerator for the LC II / CC. Will probably do another deign based on annother card I have that also works on the LC I (and has cache so will be faster) but that will be a significantly more expensive card to produce
  14. M

    First draft: [ATTACH] Still needs a little tweaking but it;s almost there

    First draft: Still needs a little tweaking but it;s almost there
  15. M

    LC III: Battery +ive side: What chip is it connected to?

    From my as yet incomplete LCIII schematic:
  16. M

    Macintosh IIci Logicboard recreation

    I was hoping to get these ordered this month but my projects budget ended up being eaten elsewhere All being good they will be sent off for production at the beginning of next month Once I have the boards and have verified the revised version is OK I'll contact everyone who has expressed...
  17. M

    For anyone who wanted to try Rhapsody before...

    Oh nice! We where looking for complete unmodified images of rhapsody (particularly DR2) when I was active on MG about 10 years ago! Thanks for uploading them :)
  18. M

    Macintosh IIci Logicboard recreation

    Right, Have made the necessary alterations to the board and am having a look at getting a run made Purple seems to be the most popular colour so we will be going with that Do you guys want them with the bottom birdseed PNP assembled? Doing some rough pricing you would probably be looking at £60...
  19. M

    Field Strip a Macintosh LC in Under 30 Seconds

    Interestingly I don't find the LC cases to be that brittle, of all my LC's I only have one where a tab has broken from normal use and one more where a internal tab was broken during shipping (But has been fine for years after glueing it back on) Wonder the if a different plastic mix was used on...
  20. M

    Sort of, this approach only works because this the accelerator is not really a PDS card, it is...

    Sort of, this approach only works because this the accelerator is not really a PDS card, it is just hanging a faster CPU off the bus and the PDS connector happens to convinently have all the needed signals . If you wanted to do the same thing with two PDS cards you would need additional...
Top