• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    I assume you’re referring to the 2GB “volume” image provided by savagetaylor vs the 6.0.8 “disk” images (which are 800kb or 1.44mb a piece). Yes I understand the difference between those.
  2. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    Uhh, I think so, but enlighten me just in case ;)
  3. H

    Easier way to mount .img and .dsk files on original hardware?

    I have a Mac SE FDHD running 6.0.8 with 2MB of RAM. Could try to bump this to 4MB and move to 7.5.3+ if I must to achieve what I want. I now have a good sized collection of .dsk and .img images on my SCSI2SD. MountImage and DiskCopy and DiskDup+ don't seem to recognize them. I could write...
  4. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    So I think I figured out what the issue with my Windows-created boot disks was. There are both 800k 6.0.8 System Tools images (set of 4) and 1.44mb images (set of 2). I think was trying to write the 800k images to 1.44mb disks. I just tried to create new diskettes from the 1.44mb images and it...
  5. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    An update for you all! I cleaned the floppy drive a little bit but it was already in good shape. I used a 800kb 6.0.8 System Tools diskette (from eBay) and got a Happy Mac right away. Booted. Swapped to my own 1.44mb System Tools disk and got a “this disk has errors would you like to repair?”...
  6. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    Thank you all for the quick responses. - I will take the G3 out of storage and try to make some disks with that instead using DiskCopy. I have gotten it on the internet but it’s not an easy affair. I will use a modern Macbook Pro to format a flash drive and copy disk image files to the G3 in...
  7. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    And thank you for the warm welcome :)
  8. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    Using a Windows machine with a usb floppy drive. SCSI2SD was set with default settings mostly, single SCSI drive with ID 0. Tried all of the recommendations here too (Apple quirks mode, Set the vendor to the string “QUANTUM”, Set the product ID to the string “FIREBALLX”, where X is a number...
  9. H

    SE FDHD ejects boot disks, won't acknowledge SCSI2SD

    Hi all. I'm new here. I have a Mac SE FDHD that used to boot from the internal HDD. Sometimes. It was getting flaky. So I purchased a SCSI2SD v5.1 and connected it and applied some disk images from savagetaylor's blog using dd to no avail. The SCSI2SD lights up, is being fed power (have...
Top