• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. GaiusIuliusCaesar

    Anyone have experince with overclocking G4 Quicksilver

    Actually that site is what got me thinking about that. Thanks everyone for the info by the way
  2. GaiusIuliusCaesar

    NuBusFPGA: HDMI on NuBus Macs

    I think there is a way around the HDMI license by putting it into DVI mode. I think thats how the GBA Consolizer and gets around it and why not all TVs work with audio for that mod. Couple of other things out there I think are labeled that way as "Digital Video" or "Digital Out"
  3. GaiusIuliusCaesar

    Anyone have experince with overclocking G4 Quicksilver

    I saw that the clock speed and voltages on the CPU cards can be changed by changing the resistors on the board. Does anyone have experince with this? I know each chip is different, but is there a certain amount that is reliable to overclock to, say 90% of the time? I currently have the 800mhz...
  4. GaiusIuliusCaesar

    ibook G4 14" - Mid 2005 Screen slightly dark

    I obtained a iBook G4 14" - mid 2005, and the screen is slightly dark, even at it's brightest. Do I need to replace the panel or is the backlight separate in a unit this old. Also, might as well ask, is there an adapter, or series of adapters to go from what ever connector is used for this...
  5. GaiusIuliusCaesar

    Designing RaSCSI case for CM4 IO board and OLED questions

    Ok got the OLED attached via jumpers and it kinda works. Set height to 64 in the script and still gives mostly grabbled display any ideas from anyone here on what is going on?
  6. GaiusIuliusCaesar

    Designing RaSCSI case for CM4 IO board and OLED questions

    I actually don't know much really, just saw that the NVMe storage worked with the I/O board and the firmware had been updated to allow booting from it. Also read that for read/write speed that PCIe 1x > USB3.0 > emmc > microSD. As for routing PCI over pci express that is way out my league. It...
  7. GaiusIuliusCaesar

    Designing RaSCSI case for CM4 IO board and OLED questions

    I am working on getting a RaSCSI setup for using the Raspberry PI Compute Module 4. I have the I/O board and 1GB ram CM4 Lite(no onboard EMMC). I wanted to use a 2GB or 4GB version but they are out of stock at work due to chip shortage(I am a repair tech at Microcenter). Anyway, the whole...
  8. GaiusIuliusCaesar

    Centris 650 heatsink clip dimensions, looking to model replacement to 3d print

    Actually both, I was planning on moving the heavier heatsink from a Centris 650 to a Quadra 650 with the other heatsink. I was examining also looking at using this. I was asking because even using caliper I always screw something out. You should have seen how many revsions it took me to...
  9. GaiusIuliusCaesar

    Centris 650 heatsink clip dimensions, looking to model replacement to 3d print

    I am looking for the dimensions for the bracket that holds the heatsink for a Centris 650. It is label 830-0115. I want to model and 3d print a replacement that includes a small fan mount. Googling that number didn't help. I plan to use Polycarbonate(PC) for printing so should hold up to the...
Top