• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. Johnnya101

    Possible source for 100 Radius Rocket Stage II NuBus cards

    There's just no way. Who names a site canpharm.top? No reviews or information at all anywhere. The generic shopping images don't make me feel too comfortable either. Although I did do a reverse image search, and it is a unique photo...
  2. Johnnya101

    I need help with my IIfx

    How are the caps? You should probably replace the few electrolytics on there, unless you got lucky and it doesn't have them. They usually only affect power, but you never know. Also, could it be a RAM issue?
  3. Johnnya101

    MacIPRpi on a raspberry pi 1?

    Oh, yeah its the AppleTalk server that wont work.
  4. Johnnya101

    MacIPRpi on a raspberry pi 1?

    None of you ran into the issues I did with a 3? Something in one of the packages installed looks for a 4 CPU or something and won't run correctly and causes it to crash.
  5. Johnnya101

    What is the best plastic to use to print hinge standoffs?

    ABS over PLA any day. PLA in an electrical environment like this will break down or warp due to heat.
  6. Johnnya101

    Macintosh Color Display: How did I royally screw this up???

    ...or make the first LCD conversion without feeling bad ruining a good one.
  7. Johnnya101

    ImageWriter II Carriage Grinding/Jumping

    How tight is the belt? Guessing at this point in time, it would not be unusual for the belts to start stretching out and slipping. The carriage, at least as I remember it, has some resistance when you move it manually. I don't think there should be any belt slack.
  8. Johnnya101

    Success!! Mac SE rebuild

    Looks good! Did you need to retrobrite or was it still white?
  9. Johnnya101

    ImageWriter II - one pin does not work

    At this point, wouldn't the last suspect be the logic board? Not really familiar with the ImageWriters.
  10. Johnnya101

    Power Macintosh 7500

    If you want a very reliable Mac for 24hr usage, recap the logic board and PSU, or get it done by someone like Amiga of Rochester. Otherwise, for random whatever use, a logic board recap should be okay for now, unless the PSUs in these are known to go too?
  11. Johnnya101

    ’03 MDD 1.25GHz SP FW400 - No load or boot of OS 9

    Wasn't there some sort of issue installing OS 9 if you already had OS X installed, or was it the other way around? OS 9 required special drivers, but I can't remember if you can install it after installing OS X. Is there a separate drive available to try a clean install?
  12. Johnnya101

    Mac SE FDHD floppy drive constant buzzing

    Third on broken gear. The originals are made to break. The replacements, not so much... But oh well.
  13. Johnnya101

    Well I found another Prototype....iisi

    Noticed this on my IIs as well, my IIx had black slots, my current IIfx had white slots, and my IIfx from years ago had black slots.
  14. Johnnya101

    Possible IIfx SCSI issue?

    Yup, G3 is very fast for it. Scanner works! Sorry for the false alarm.
  15. Johnnya101

    Possible IIfx SCSI issue?

    Good to hear. It's actually got an 800mhz sonnet G4 upgrade, so it should be pretty fast. So it sounds like the speed of the IIfx is correct, going to guess 30 minutes or more per slide.
  16. Johnnya101

    Possible IIfx SCSI issue?

    Reinstalled the software, no change. Reinstalled again, and now it's working. Not sure why it didn't work the last two times. Now when previewing it is stuck loading, so I will dig out the G3 tomorrow and see what happens. I would think the IIfx would be plenty fast for this. If the G3 works...
  17. Johnnya101

    Possible IIfx SCSI issue?

    Got my Nikon CoolScan III cleaned up today, and turned it on without connecting it to anything. Light blinks slow, motors spin up and down, light goes solid. So I know the scanner works. First I connected it to the IIfx in this order, IIfx > CD ROM (1) > Black IIfx terminator > Scanner (2)...
  18. Johnnya101

    Portable 5120 (non-backlit) always goes to sleep

    That is great to hear. Can't wait to see the thread on it.
  19. Johnnya101

    Well I found another Prototype....iisi

    How are all these prototypes drawn to you? Lol
  20. Johnnya101

    Rasterops Accelerator

    Depends on what your use case would be. If you are a graphic designer, video editor, or do film scanning, or anything that needs lots of colors, a higher end card such as any of the 24 bit cards would be best. If you are just gaming and don't care about colors, and want the fastest card...
Top