• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. G

    2400c - How to keep it working?

    Apologies for resurrecting a really old thread, but I am experiencing this exact issue on my 2400c and I was wondering if you could elaborate a bit more on this before I start tearing the trackpad assembly apart? In particular, any photos would be incredibly helpful but in general what do you...
  2. G

    PowerBook 2400c and CF to IDE adapter

    I had this exact issue on a PowerBook 2400c I just picked up. Ended up ordering this and it works perfectly: https://www.amazon.com/Syba-Compact-Adapter-Enclosure-SD-ADA45006/dp/B0036DDXUM/
  3. G

    Rebuilding a Pismo battery

    I used this one: https://www.amazon.com/dp/B08B4RJ58B?psc=1&ref=ppx_yo2_dt_b_product_details, and used these nickel strips: https://www.amazon.com/dp/B08RHP8NDD?psc=1&ref=ppx_yo2_dt_b_product_details Be warned, this is a very very dangerous project, so be prepared for that. I made sure I had a...
  4. G

    Rebuilding a Pismo battery

    So after replacing the board, it showed a capacity of around 3800mAh, which is presumably what the old cells were at before the battery died. When I charged it, it hit "100%" relatively quickly, but continued to charge for several hours after that. I then ran a full discharge and a full charge...
  5. G

    Rebuilding a Pismo battery

    Replaced the DC input board and the charger board today. I'm reasonably sure it was just the DC input board but I ordered both anyway. The battery is now charging as it should, and I'll report back here with the results of the cell swap. My estimate is that it should have a working capacity of...
  6. G

    Rebuilding a Pismo battery

    Quick update: after some sleuthing I’m now reasonably sure the Pismo’s charger board is broken. OS X’s System Profiler shows the dreaded “AC adapter cannot charge battery: Yes” message, and says it’s a 26W power supply. I’ve ordered a replacement power board, and will tear the machine down...
  7. G

    Rebuilding a Pismo battery

    So I have a Pismo which had a completely busted battery. Taking it apart, three of the cells were leaking and pressing the charge indicator button wouldn't show any signs of life. Occasionally it'd show maybe 1 flashing light but most of the time it'd show nothing. The computer didn't recognise...