You would need :
- a resistor
- an adb connector to solder
- a Pro-Micro arduino (often come with headers so no need to buy some more)
I would say that if it's a ProMicro clone you should not have issues, but make sure it's a true copy to make sure it's pin to pin compatible.
Little updates here :)
I improved a bit stability and was able to load an html page in Netscape and connect to an Apple Share Server using 68net :D
Everything is half stable for the moment, I need to improve the reselection algorithm which seems to take a lot of time before...
Hi everyone !
I have been really really busy with life and work last year but I really wanted to make this project work !
I have been struggling in the last week with implementing correctly reselection on 68net which was really tricky because timing are tight and driver does not behave always...
Yes using a pin to enter the bootloader seems like a good idea :) It is for instance how it works on STM32 where the BOOT0 pin can be held low (or high, I don't remember) to enter the bootloader at reset.
This safe because when that pin is not triggered the bootloader does not affect your main...
I'm sure I'm in good company 😋
Makes sense. Too much time sensitive stuff going on would makes it hard to handle all communication going on :)
Makes sense also. One thing you could do (and that maybe you already thought about) is to expose the programming headers so that people who have a...
Two naive questions here :
Do you really need the PIC there ? I know a lot of code and work has been put in developing a transceiver for that chip but how much would it cost to port that code to the esp ? (Maybe that's too much)
I have a really old experience with PIC, and back in the days you...
Thanks for your clear answers !
Little noob question, if ones want to do ethernet on its vintage mac what are the pros and cons of using EtherTalk on your hardware versus using SCSI to Ethernet boards ? Which would be the best solution ?
For information here is the connector I bought and the one this board is designed for : https://www.digikey.fr/fr/products/detail/kycon-inc/KMDGX-4S-BS/9990073?s=N4IgTCBcDa4AwE4wFoDSBZAIgcQBrIBYBlZAIRIDlMQBdAXyA