• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. EmmyOcelot

    PowerBook 520c Screen Issues

    Wow, that’s quite an offer. I’ll PM you then. I truly hope you can get it to work. First computers like that are hard to part with or see broken. You’ll have to promise me you show me the results of your testing with it though!
  2. EmmyOcelot

    Supermac Spectrum/24 III questions

    I should be able to, though I need to get a new chip programmer as mine bit the dust. When I do get a new one @Jamieson, I’ll let you know and hopefully get that bin file for you.
  3. EmmyOcelot

    PowerBook 520c Screen Issues

    If you really want it then I’d be willing to do a trade. At least for me, I’d send you the whole upper case since trying to carefully send just the screen probably would not go well with our post office. (Tend to not be the kindest on boxes) For me, this second 520 is just taking up space...
  4. EmmyOcelot

    Supermac Spectrum/24 III questions

    Fellow Spectrum/24 III owner here, I can't seem to find the v1.1 rom for you online but I do have the rom in mine. It may take me some time but I may be able to dump it. Does the 1.0 rom limit anything that you know of?
  5. EmmyOcelot

    PowerBook 520c Screen Issues

    Bringing this post back from the dead now that I’ve actually done what I said I would do. I swapped the display once again in my working 520c with its working cable and the same thing happened. I may crack it open to check for leaky capacitors but the fact that color is showing for that brief...
  6. EmmyOcelot

    PowerBook 520c Screen Issues

    Interesting @AEChadwick. I haven’t tested anything yet but I’ll keep that in mind when I go to test it. Hopefully since I lost today, I can respond thoughtfully tomorrow.
  7. EmmyOcelot

    PowerBook 520c Screen Issues

    Noted I’ll get them tomorrow and report back.
  8. EmmyOcelot

    PowerBook 520c Screen Issues

    So I’ve built a 520c from parts that are known working except the display. I have never had this display work but it seems to have some life in it. It briefly shows colors before going all black so I’m wondering if it’s something with the inverter board or the cables. Any help is appreciated. Emmy
  9. EmmyOcelot

    Putting the “Power” in a PowerBook

    Hi everyone! After having success with nabbing a PowerBook 520c for cheap, I wanted to push its limits and see what I could make it do. Its little 25 MHz 040 wasn’t enough for me and after acquiring a 33 MHz 040, I craved something more of this machine. I had heard that PPC accelerators were...
  10. EmmyOcelot

    PowerBook 520c will not power up

    I’m continuing off of this one as it doesn’t seem to make sense creating another one on the same machine. Ok! I just got the cable for my PowerBook 520c and after plugging in the cable and trying a disk, no spinning noises or it being ejected. It will only come out if force eject it out. I’ll...
  11. EmmyOcelot

    PowerBook 520c will not power up

    It’s ALIVE Both the ram and cpu are working just great with the new brick. And I can now confirm it was the old one. Guess it’s time to make a new one with the cable. Since I now have some extra parts, along with an entire lower assembly, I’ll test the parts and sell them here someone else can...
  12. EmmyOcelot

    PowerBook 520c will not power up

    I recently just got a new cpu and ram for my PowerBook 520c and went to try the new processor and it wouldn’t even spin up. Switching the cpus back does nothing either. It relies on it’s old ac adapter and I don’t know where to start to get it working. Any ideas to start? :( Emmy
  13. EmmyOcelot

    PowerBook 5xx ram mod?

    Hi everyone!  I got my hands on a PowerBook 520c a little while back and was wondering with the ram card kind of expensive and hard to find on eBay, could I get 2 8mb ones (identical cards of course) and combine them on one board to make a 16mb card? If so, would it be practical? Any answers...
  14. EmmyOcelot

    Jerry Rig a Battery

    Hey everyone! Got a quick question to ask, I'd like to replace my 1/2 size AA battery with a cr2032 or AA setup. How would I go about doing either? Is it a simple solder? Thanks :)
  15. EmmyOcelot

    Emmy's Dream Machine

    This fella came in yesterday. Let’s give it a spin
  16. EmmyOcelot

    GCC on A/UX?

    Figure i'd ask here since I have A/UX on a quadra, Has anyone gotten gcc (GNU C compiler) fully installed and setup on A/UX? If so, please tell me how you did it. I'd like to add some other newer GNU stuff like sudo or bash but they require gcc to compile them. It's been quite some fun trying...
  17. EmmyOcelot

    Emmy's Dream Machine

    After selling my 610. I was determined to get a machine to run A/UX 3.1 get up and running. Well, few hours later I found this guy for a real steal and got it yesterday. One install and some ram configuration later, this Quadra is a screamer! Hope to find a good nubus graphics card for it to...
  18. EmmyOcelot

    Quadra 650 caps

    Hey everyone!  I recently got a hold of a Quadra 650 and need to change its caps asap. Does anyone know which caps are needed for it? I'm going with tantalum caps but cant seem to find any reference on what voltage or capacitance they need to be.
  19. EmmyOcelot

    Recap gone right?

    Well....just goes to show. Check the polarity of all caps.
  20. EmmyOcelot

    Recap gone right?

    Howdy everyone! A while ago I got recommended the advice to recap my Q610. Well, today was the day and I finally did it....only to not be sure if I have them on the right way. Can someone confirm I have soldered them on the right way? Last thing I want is for them to snap crackle pop....
Top