Search results

I have an Apple IIc NTSC model (220v) and I want to connect it to the classic 9'' Apple IIc monitor which is PAL. Will work the IIc with the monitor or not?

My motherboard -recently recapped- and my modules.First bank has 4 modules 256kb each second bank modules 4mb.I think the problem is the modules.They have only 2 chips per module.As a result my SE/30 sees only 2mb of ram.

I have a SE/30 recently recapped from a very good technician.If had 5mb of ram (4x256 and 4x1mb).I have changed the brand new modules(4x4mb-60ns) from the IIci to SE/30.I have putted on the first bank(A bank).Machine does not boot and had stripes on monitor and the sound of death. Then I have...

I have tried my original Photoshop 2 disks to my Classic II and LC475 and suddenly neither of two internal disk drives reads any disk...(before both machines read/write normally all the disks) Is it possible a disk to destroy the disk drives?

I have a Performa 450 but seems completely dead.I have added a working battery but nothing.Does not start up or any sound from power supply... what can I do?

Guys can I use these floppy drives(I think they are from LC) with  my Macintosh IIfx or not?

Guys can we find a schematic for the Power Mac 7500 for a friend because he want it for fix some caps from the motherboard.He does not have sound and has problem with two caps as he said to me.

I have the Power Mac 6100 but got low level sound from the speaker.Need to recap it or not?

 allright guys, i found that the vram failed, so i removed it, sockets and installed spare ones. now i get horizontal stripes that after reset i have chime and blinking mouse and disk sign

From a friend of mine who has problem with his SE/30 "Hello Guys! I've recently owned a SE/30 .i have the squares on my screen that indicates interruption between rom and cpu. i have recapped my board using tantalum caps and problem still persists. i found another SE/30, tried the rom simm and...

I want to upgrade my SE/30 to 32MB of ram.I have found 8 modules 4MB 30 pin ram but are all non parity.Will they work or not?

I have a SE/30 for over 10 years now without recapping it.Today I tried to boot it up but shows this picture.(it booted up once)I’m thinking to send it for recapping.

I have a PowerBook 520c which works fine except floppy.Have to recap or not the computer?Also where can I find replacement for internal floppy drive.Does not read all the disks.

I have two PowerBook 100.I sent them to a technician for recapping and restoration. Is any guide to give him for opening the PowerBooks?  Also he will try to fix internal hard drives. 

I have two PowerBooks 100 one 170 and one 165c for restoration/recapping.I will sent all the machines to my friend technician.Is any guide I have to give him for recap the machines?Also 520/540 PowerBook needs to recap it or not?And where can I find hard disks for the PowerBooks?

Also the floppy drive is a bit “down” from its normal position and as a result I cannot insert a floppy disk...

This is the mysterious black box.

I have opened my 512K to reinsert the floppy drive and discovered a cable wrapped in sellotape to be in the air.Is it normal or not? I’ve post some images from the cable.

I have purchase after a long time a rev.A iMac.First time boots ok and then nothing.It starts with a chime the disk spinning for while but the screen is black and the machine remains stuck.Any suggestions please?(this is the first time I have received an iMac in such a great external quality and...

I have change the position of the batteries and now shut down normally for now... Some pics form motherboard.