• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Search results

  1. Mr. Ksoft

    Crescendo G3 Nubus - VRM blocks PDS cards?

    A while back I salvaged a Crescendo G3 Nubus 215-225/512k from a dead, rusted out Power Mac 8100.  This one of the earlier versions of the card so it is laid out a bit different than the later purple heatsink versions at higher speeds.  I was going to add it to my 6100/60av but it seems that the...
  2. Mr. Ksoft

    StarMax 4000 only boots via CUDA reset button?

    I recently picked up a Motorola StarMax 4000/160 DT.  Seems to be in decent cosmetic shape, no obvious damage on the board, but it doesn't power up via the power button or the keyboard soft power.  Strangely it powers up immediately without pressing anything if plugged in after being unplugged...
  3. Mr. Ksoft

    Cannot change resolution on Radius PrecisionColor 8-24X

    The IIci I recently picked up has a Radius PrecisionColor 8-24X installed for a graphics card.  I am using a VGA adapter (Griffin MacPNP) as I no longer have any working Apple DB15 monitors.  With or without RadiusWare installed, I can only choose 1152x882, or 1056x807 (WTF?).  It believes I am...
  4. Mr. Ksoft

    Sad Powerbook 150.

    So I grabbed a Powerbook 150, which I've been interested in due to it still being a very late BW/Trackball Powerbook with an IDE drive.  I knew going in it had hinge problems, so I thought since it was going to get tossed anyway, I might as well see if I could take drastic measures to fix it. ...
  5. Mr. Ksoft

    Error type 10 when accessing hard drive with disk utilities

    I just got a Quadra 650 board in, which is currently fitted with a 68LC040, and I've got it up and running. I'm trying to install Mac OS on the original drive, a 160MB IBM drive. Unfortunately, every time I run a program that accesses the disk outside of the file system, like Disk Setup, Apple...
  6. Mr. Ksoft

    6100 doesn't see drive on SCA->50pin adapter

    I've been having bits and pieces shipped in this week and I'm testing them on my 6100. Since the hard drive is ridiculously limited, I bought an SCA drive and an adapter since I had read that this works. Image of drive Image of adapter (50pin side) Image of adapter (SCA side) So I plugged...
  7. Mr. Ksoft

    Wanting to massively upgrade Performa 600

    My first computer, a Performa 600, has been dead for about a year with a bad power supply. Looking at it recently and getting a wave of nostalgia, I decided that once I get a replacement one, I want to upgrade the crap out of it, so that it can be a really nice 68k machine to do general...
  8. Mr. Ksoft

    Pismo OS9/Tiger dual-boot problem

    I'm trying to get a dual-boot going between OS 9.2.2 and Tiger on my Pismo. I have a 30GB hard drive in it, which is partitioned with 18GB for OS9 and 12GB for Tiger. OS 9 is installed fine. I put in the Tiger disc and installed it to the second partition, but when I reboot into it, I get the...
  9. Mr. Ksoft

    Getting a better experience out of a 6100/60av

    So, my only functional Mac right now is a 6100/60av. Mostly, I just use it to write stuff and play old (almost exclusively 68k) games. But it always seems a bit pokey. I know the 6100 isn't that great anyway, but since it may be a while until I can get anything better-suited I am trying to...
  10. Mr. Ksoft

    Performa 600 on the way out?

    Hi, first post here. Nice to see a community for the ol' 68k Macs. I have this Performa 600, stock except that it has been upgraded to 20MB of memory. It was my first computer, so I've kept it around for nostalgic purposes even though it is such a terrible performer in the Mac world. I...
Top