That was the first thing I tried. That link is likely on an intranet as it doesn't work publicly.
You can configure an IP address via the front panel. Here's a picture of what comes up when you point a browser to it
I think it might be anything with an ARM processor but I am not sure. It has a built-in webserver and it comes up named as an "Astris Debug module" with configuration screen for an "Astris: Remote Jtag Probe" with additional configuration screens for front and back serial ports. I need to hook...
Got it. It's an Astris prototype tool. Searching for "Astris" brings some interesting functionality just for a cable but there is no info about this particular box and the URL on the PCB must be internal only.
Yes, it does have USB and I think I can make out a date of 2000 on the short board plugged into the front.. Looks to have Ethernet, USB and 9-pin serial? The short board also has pins for RX TX and GND. I cannot make out the name on the board but it's something like SW0... V0.3 and it is...
I am guessing this is some form of testing tool. Anyone have any idea what it might be? It's stuck in shipping so who knows if/when I'll get it. It's an Apple Development Team "black box" :) The person I got it from had no idea what it was either so no clues there.
@OldMacGuy I recently restored my Lisa 1 with dual Twiggy drives just this past weekend. You can see a quick demonstration and hear the variable speed Fileware diskettes in it below.
Stepleton helped me out with my Lisa and would be a great help but if you need someone a little closer, I am in...
The reputation of Twiggy drives wasn't good to begin with. I figured I'd just go with whatever someone had already tried and thought was okay. He noted that even other 3m DS/HD diskettes with different product numbers didn't work well. It's a picky drive given it's non-standard requirements. :)
It was recommended by James MacPhail to use DS/HD 3M diskettes and the particular brand/product noted below. In addition to this "bad" floppy, I also have "Lisa Office System 1" and "Lisa Office System 2" diskettes recreated by using BLU on my good Twiggy drive. I used those diskettes to...
@10001001sos The hand-cut edges are fine and it does hold up as a working replica. I am restoring a Lisa 1 and you can see it working here with one of these hand-made disks even though the particular disk I am using for testing has a bad track somewhere in the middle of the disk (because of the...
Thank you. I didn't want to post what I thought but I see how you came up with that was what i was thinking but could it be something up stream of the memory or does the "04" lock it in as a memory error for sure?
g10 = 2000
g6 = 0200
f9 = 0010
f8 = 0008
f6 = 0002
F5 = 0001
Thank you!
I am usually pretty good at deciphering these Sad Mac codes but this one is kinda complicated for a Mac 128k with original board. Is this multiple memory chips or perhaps something else?
@maceffects I was going to look into ordering a small batch for anyone else who might want one too but if you'd like to do it, I'll purchase one of yours. Thank you.