I can only confirm that 8 of these fit perfectly and have been woriking with no problems for about a year in my SE/30.
https://eshop.macsales.com/item/OWC/30PS16MB/
That's the right link, yes. So go with 25v Polymer Tantalums (and that one little 50v)
Here's a link to what I used. These have been perfect.
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=33371c761b
Also and possibly most important, use 25v polymer tantalum capacitors rather than 16v.
JDW made a good video explanation of why this is a better idea but I can't find the link.
I used 25v polymer tantalums as he recommended and I've had no issues at all with my SE/30.
Very good news! Looks relatively clean. Yeah, be careful with the simm slots. Should one break, I know some people recommend using a little hot glue at the edge of the slot. UE8 looks pretty good and you said you have no video issues so that should be fine. Things do look a little funkier by the...
well, again, just knowing you won't have to worry about it for another 15 or 20 years, at least… that's good enough for me. To each their own. I also just enjoy recapping those and find it the simplest part of a full restore. Surely there is a little bit of OCD going on in this hobby in general...
OK to each their own but I say if you've got the skills to replace the logic board surface mounts, there's no reason to not replace the 30+ year-old caps on the analog board. All the components are pretty far away from each other comparatively and JDW's mouser cart is about $20 i think.
I...
yes, thanks. As stated earlier, just trying to get files over to the SE .. which has a spinning disk drive... and you are absolutely correct that I have no idea what I'm doing...YET!