Recent content by rjkucia

Hi all, This is probably a bit of a long-shot, but I was figuring out how to use Beagle Bros.' Frame-Up, and the manual (https://archive.org/details/Beagle_Bros-Frame-Up/page/n15/mode/2up) mentions a keyboard guide that lists the shortcuts available. Unfortunately the shortcuts themselves...

I just watched a video of it, and I was definitely thinking it would be harder than it actually is! Nice big spot to use way too much solder on :) I was afraid it would be much tighter, with bodge wires etc, but I can definitely do this! Edit: Just realized I had missed your guide, which...

Mine have one notch and the stickers - the stickers are for making both sides read-only, correct?

I have been using ADTPro, it was honestly surprising how easy it was to get working! I have about 10 floppies that I've been swapping around with various software. Dumb question about 5.25" floppies - if they box says they're "double sided", should they just work if I flip them over? Or do I...

Yes I do plan on doing this at some point! However it looks like that's about $80 and requires some soldering (which I am very bad at), so I'll have to build up the courage for that :)

I finally did it - I got a IIc at VCFMW this weekend! I took it home and had the experience of figuring out how to use it - and figuring out which of my TVs like the composite signal and which ones don't. On the way are serial cables & floppies for ADT Pro, and a cheap composite-HDMI adapter...

Got a replacement from OWC, and this one works perfectly. Guess it was just a bad stick!

I was able to test with a different clamshell, and the RAM still shows up as 64MB. Seems like it's most likely a bad stick, although this is the first time I've seen this exact issue. I've contacted OWC to ask for a replacement.

Whoops, sorry, meant to quote - it was the display cable!

…yep, that was it! Thanks everyone! It feels silly but ya’ll definitely saved me a ton of time here.

Okay well I tried taking out the RAM and Airport card, and no change. Except… I left it alone for longer and eventually the disc stopped spinning and I got a “squeak” sound from the speaker. Clicking the volume up/down buttons also made this noise. So, it seems it actually booted from the CD...

It's actually an old SSD, but it (and the adapter) seemed to work & format fine with my Intel Mac. I just formatted it as Apple Partition Map + an empty HFS+ partition. I'll try the RAM and Airport next. I can try checking that, but I wouldn't say it's a blank white screen - it's more like the...

Hi all, I have an iBook G3 Clamshell Tangerine that I just took apart and put back together with an SE (366MHz) logic board and an SSD. When I put it all back together, I get the boot chime just fine, but instead of seeing a Happy Mac (or, the ? Folder, since the drive is empty), I just see the...

I was able to get a battery from @therieau earlier this year - maybe he has another one?

Thanks! That emulator looks like it has a delightful interface, so I'll try it out!