Hi and thanks for Your answers.
Its true that MacOS Anthology has a lot of languages but only from OS 7 and later. The Legacy Recovery CD have only OS in english.
There is a difference in the trash bin icon between OS 2 and OS 3.
System 2.0
System 3.0...
Hi, I have a Lisa 2/10 , ROM H/88, that has been repaired with a lot of help from 68kmla.org. Its sold in Sweden with a swedish keyboard. There is Lisa OS 3.1 on the harddrive and its booting from the HD. The CRT has been burned in the screen with the previous OS thats obviously Mac OS in...
I have started this Lisa now almost everyday and let it run for half an hour. Its starting without any mechanical assistance. It running more quiet and no screaming anymore. Stepletons observation is a fact. Now its running almost "as new". No strange noise and perfect start and hardrive and...
I have started it now 3-4 times and the HD start to spin without any help. You were right (of course) stepleton. Its booting fine. The HD is maybe less noisy but sometimes it start to scream, se video below. Its not related to movement of the disk arm. With some video adjustments the picture is...
Hello stepleton and all others in this excellent forum.
Now I have got the spare parts and replaced the Q3 (BD507) and U1 (ULN2074)
I have placed a thermometer on Q3 to measure the temperatur. Q3 was burned the last time I tested the widget.
Watch the video below. the text Arkiv, Redigera...
I have tested the Darlingtons and unit 1,3 and 4 are working and switching power to a LED. Pin 8 ( unit2) is not connected. So the ULN274 is bad. Now Im waiting for new Q3 and U1. Interesting to see whats happening then, if it will start. As I understand its difficult / impossible to keep the...
Thank You Berenod for that video. Quite different sound from Your working drive. The problem is that I have not found any description if its possible to repair och replace those bearings. Or otherwise I will look for a substitute for the widget drive.
Yes, I have a 4 ch oscilloscope and a logic analyzer. Probably not only Q3 thats defect. The HD didnt spin att all first. Alter adjusting the solenoid it started and burned something (Q3?).
Testing the U1, ULN2074: I think its damaged. Disconnected it from the board and got the following result.
The resistance between B(T) and E was 11.5 to 11.9 kohms. That is pin 2-3, 6-7, 10-11 and 14-15. That should be OK according to the schematics.
but when I tested it in a transistor...
Sorry stepleton, my fault. Q1+Q2 +Q4 are all OK. Q3 is burned and will be replaced. I have ordered a new Q3 and a new U1 ( ULN2074) just in case. I will test the U1 as You described.
Here is a video when I manual rotate the drive. Its rotating 8-9 turns with some mechanical noise.
I have disconnected Q1, Q2 and Q3 and they are tested OK. I have measured the resitance in the motor from J2. Resistance from pin 1 (12V) to the motor pin 7, 8, 9 and 10 is 2 ohms. I hope...
I have studied the thread https://68kmla.org/bb/index.php?threads/apple-lisa-questions.43118/ and there is a lot of good information about the widget drive. In the picture of my widget the "ruler scale" is clearly visible. I compared to MarNo84 widget citied above. its obvious that the glass...
Thank You both for advice. I have realized that You are true experts on widget drives. I will follow your advice and report later. The drive was open for 5 min so I hope no harm was done.