Recent content by _yoast_s

Ok, the problem has been fixed! Apparantly one of pins of the rom chips (all rom chips where removed for cleaning) was bend and as such did not make contact with the socket hole. Bending the bin back and reinsterting the rom chip fixed it!

It looked like this. From some photo's I could see that the taller SIMMS where in bank B. Unfortunately, only 1 of the SIMMS actually says what it's capacity is, the rest does not. Also, thanks a lot for the help offer^^

I am in the Netherlands. I have a lot of soldering experience (10+ years, although this is the first time recapping). One of the pads did get loose, a when desoldering the new capacitor (I put it in backwards, so it had to be desoldered and resoldered in the right way). I installed a jumperwire...

(the best pictures I could take, it looks evenly white in real life) So I have recently recapped my Macintosh SE/30. Before recapping, it was functioning well, although it had no startup chime. This is for as far as I know a symptom of a mac needing to be recapped, coupled with the fact that...