doctormistral
Active member
Hello, just restored a nice 512k.
All electrolitics in the analog board have been recaped.
Every thing works nicely, the only thing I noted is the coil (in the analog board - check image) named L2 that get hot, about 80 °C.
Is this temperature normal or there is something I have to check?
Thanks for any suggestion.
All electrolitics in the analog board have been recaped.
Every thing works nicely, the only thing I noted is the coil (in the analog board - check image) named L2 that get hot, about 80 °C.
Is this temperature normal or there is something I have to check?
Thanks for any suggestion.