PotatoFi
Well-known member
I have the drive sitting out in a prominent place where it keeps reminding me! Every time I walk by, I go, "Gah! I REALLY want to work on that!" but I just haven't been able to find the time. On the hardware front, I did get not one, not two, but THREE more 3D printers. First, a Creality CR-10, which is lacking some critical feature like automatic bed leveling, but has an obscenely huge build volume. I'll be able to print an entire case on this thing, no problem. I also acquired a fully assembled but used Prusa i3 MK3, which I'll be upgrading to a MK3S as soon as I have a free weekend. And finally... I bought another Prusa i3 MK3S kit, which is en route right now.
Short version of the story: I quit my job, and I've had a bunch of side jobs pop up that have been keeping me super busy. One of those side jobs is printing a couple hundred cases for a little embedded Linux box that we use in the Wi-Fi engineering realm (hence the sudden build-out of a print farm). So from a hardware perspective, I'm getting REALLY set up to produce some of these cases if people are interested. I just need to get some time to do the modeling for this project. Right now, the light at the end of the tunnel is mid October.
Short version of the story: I quit my job, and I've had a bunch of side jobs pop up that have been keeping me super busy. One of those side jobs is printing a couple hundred cases for a little embedded Linux box that we use in the Wi-Fi engineering realm (hence the sudden build-out of a print farm). So from a hardware perspective, I'm getting REALLY set up to produce some of these cases if people are interested. I just need to get some time to do the modeling for this project. Right now, the light at the end of the tunnel is mid October.