Merry Purple Heatsink Xmas 6100 owners!

The NuBus architecture gets a new brain!

Merry Purple Heatsink Xmas 6100 owners!

Postby Bunsen » 24 Dec 2008, 20:14

have you searched? Seeks: Nubus PDS DSP PB170 Newton; TRS-80 III/4; CBM BBC SX-64 CX5M Likes: 8bit luggable palmtop terminal NC tablet audio MIDI analog FM drum synth steam&dieselpunk; 1930-1980 lab/comm/mil Score! NC100 PB190 Q950 IIe-PDS
User avatar
Bunsen
Witchfinder-General
 
Joined: 02 May 2007, 15:59
Location: Melbourne, Australia

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby quinterro » 24 Dec 2008, 20:39

Niiiiiiiiiiice!!! :)

Shadow: Sawtooth Dual G4-450/1.75GB/80GB/10.4.11
Blackbird: Lombard 333/512MB/60GB/10.4.11
Monolith2: Acer Aspire 5100 Athlon X2 1.8ghz/2GB/160GB/Win7Pro
comcrap: Athlon64 x2/4GB/500GB/Win8Pro
User avatar
quinterro
 
Joined: 02 May 2007, 17:47
Location: Raleigh, North Carolina USA

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby LCGuy » 25 Dec 2008, 06:54

Someone buy it!!!! :D
"Bite off more than you can chew and then chew like all Hell" - Peter Brock
User avatar
LCGuy
LC Doctor/Hot Rodder
 
Joined: 02 May 2007, 00:52
Location: Sydney, Australia

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Unknown_K » 25 Dec 2008, 19:06

Somebody did, who was it?
Favorites: big box Mac IIs, 950, 800's
Wanted: Anything Nubus, Video capture and editing hardware and software for 68k mac. Original software including A/UX.
Looking for 9150, Mac II, Color classic, 840av motherboard, and Nubus cards.
User avatar
Unknown_K
 
Joined: 01 May 2007, 23:39
Location: Ohio/USA

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby mac-man6 » 26 Dec 2008, 04:06

I'm missing something, what's special about it?
iMac 17" intel 1.83ghz, Quadra 840av, PB150, iMac G3 266hmz ATX hack, SC20 HD.
mac-man6
 
Joined: 13 Jun 2007, 23:49

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Unknown_K » 26 Dec 2008, 04:14

G3 prossesor
Favorites: big box Mac IIs, 950, 800's
Wanted: Anything Nubus, Video capture and editing hardware and software for 68k mac. Original software including A/UX.
Looking for 9150, Mac II, Color classic, 840av motherboard, and Nubus cards.
User avatar
Unknown_K
 
Joined: 01 May 2007, 23:39
Location: Ohio/USA

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Danamania » 26 Dec 2008, 04:29

mac-man6 wrote:I'm missing something, what's special about it?


Like Unknown_K said, the g3 - for a video card to go into a 6100, you need an adaptor to turn the PDS port sideways. These adaptors are usually little more than an inch and a half high circuit board with tracks taking the PDS slot to another PDS connector at right angles to the original.

The one pictured is a G3 CPU upgrade, which also works as a right angle adaptor, with a graphics card plugged into it - and it's advertised as *just* the graphics card. Arguably, the G3 that the seller neglected to notice is worth more than the video card itself.

Dana
Danamania
Official 68k Muse
 
Joined: 01 May 2007, 23:27

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Bunsen » 26 Dec 2008, 05:37

What Dana and Unknown_K said. The purple heatsink is the sign of a Sonnet G3 upgrade. Something all soldiers should keep in mind out in the field [:D]
have you searched? Seeks: Nubus PDS DSP PB170 Newton; TRS-80 III/4; CBM BBC SX-64 CX5M Likes: 8bit luggable palmtop terminal NC tablet audio MIDI analog FM drum synth steam&dieselpunk; 1930-1980 lab/comm/mil Score! NC100 PB190 Q950 IIe-PDS
User avatar
Bunsen
Witchfinder-General
 
Joined: 02 May 2007, 15:59
Location: Melbourne, Australia

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Bolle » 26 Dec 2008, 10:48

hummm this one is epic xD
Bluets and Granola Bars, Make a chewy snack.
User avatar
Bolle
 
Joined: 02 May 2007, 06:21
Location: .eu

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby mac-man6 » 26 Dec 2008, 15:59

I thought it was that but I didn't think they made G3 upgrades for 6100. Nubus 601@66mhz to G3 is quite a jump.
mac-man6
 
Joined: 13 Jun 2007, 23:49

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby MacG4 » 26 Dec 2008, 16:21

mac-man6 wrote:I thought it was that but I didn't think they made G3 upgrades for 6100. Nubus 601@66mhz to G3 is quite a jump.
in fact there are even g4 upgrades for the 6100
"keeping the mac legacy alive one day at a time"
-Mac II Collection: IIci,
-Powerbooks: 100
-LC's:475
-Powermacs:6100
-Clones:Outbound Laptop
http://macg4.biz.ly/
User avatar
MacG4
 
Joined: 02 May 2007, 23:11
Location: Des Moines, Iowa

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Unknown_K » 26 Dec 2008, 19:02

I have a G3 upgrade in one of my 7100/66 systems, the slowness of the rest of the system slows it down quite a bit. A G4 in a Nubus PPC is about worthless in my opinion.
Favorites: big box Mac IIs, 950, 800's
Wanted: Anything Nubus, Video capture and editing hardware and software for 68k mac. Original software including A/UX.
Looking for 9150, Mac II, Color classic, 840av motherboard, and Nubus cards.
User avatar
Unknown_K
 
Joined: 01 May 2007, 23:39
Location: Ohio/USA

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby gobabushka » 28 Dec 2008, 08:50

thts how i found the g3 upgrade for my c500, which is officially maxed out, as soon as i put the cdr drive in!
"I reject your reality and substute my own!!!"
User avatar
gobabushka
 
Joined: 02 May 2007, 12:47
Location: Palm Bay, Florida

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Mycatisbigfoot » 09 Dec 2009, 11:40

I got a g3 card in my pm 7600, it's faster then my g4 at 400mh, as the card is 460mh or somthing around there, I plan to try installing 10.2 on the computer, but that hdd is so small, so yea,
French Is the Best for Me Guys
Geting Soon
I-Book Clam Shell Indgo
I-mac G3 Indgo
Specs Unknown
Mycatisbigfoot
 
Joined: 13 Sep 2009, 22:18
Location: Quebec

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby LCGuy » 10 Dec 2009, 04:53

Unfortunately you won't be able to get any version of Mac OS X onto your PM7100, nor any other NuBus Power Mac, even with a G3 upgrade. Mac OS X has absolutely no support for NuBus architectures whatsoever, meaning that you're stuck with either System 7 - OS 9, or a PowerPC linux distro that is compatible with NuBus (such as MkLinux)
"Bite off more than you can chew and then chew like all Hell" - Peter Brock
User avatar
LCGuy
LC Doctor/Hot Rodder
 
Joined: 02 May 2007, 00:52
Location: Sydney, Australia

Re: Merry Purple Heatsink Xmas 6100 owners!

Postby Quadraman » 26 Jan 2010, 18:01

Bah! I don't get worked up over G3's for Nubus Powermacs. Now if it was a G4....
Apple IIe IIc IIGS. Mac 128/512k->Plus 2xPlus SE. Dismantled IIci LC580 6320. Frankenmac Q700/IIvx, 631CD+040, 7500. 6100/60AV /66DOS 6116CD. 6500 7600 9500 G4DA533 G3iMac700 PB150x2 1400
User avatar
Quadraman
 
Joined: 08 May 2007, 13:41


Return to NuBus Power Mac, LC & Performa

Who is online

Users browsing this forum: No registered users and 0 guests