create/emulate SCSI drive using mini Vmac?
4 posts
· Page 1 of 1
create/emulate SCSI drive using mini Vmac?
by giolicious » 29 Nov 2011, 03:30
So how do I create/emulate a SCSI hard drive in miniVmac?
"Everything should be made as simple as possible, but not simpler." - Albert Einsten
-
giolicious - Joined: 16 Mar 2010, 13:36
Re: create/emulate SCSI drive using mini Vmac?
by theos911 » 29 Nov 2011, 11:47
You need to create a large[r] disk image. This will give you and *effective* hard drive.
68k: Duo 230, 270c, 280c, DuoDock II, DuoDock Plus, Apple Minidock, Newertech Netdock & Ultradock 16sce, 540c, 190
PPC: 2300c, 5300ce, Performa 6500, Wallstreet II 300, B&W Powermac G3 500, iMac G3 700
PRAM? When in doubt, Pull it out!
PPC: 2300c, 5300ce, Performa 6500, Wallstreet II 300, B&W Powermac G3 500, iMac G3 700
PRAM? When in doubt, Pull it out!
- theos911
- Joined: 01 Mar 2011, 01:14
- Location: Cleveland, Ohio
Re: create/emulate SCSI drive using mini Vmac?
by 24bit » 29 Nov 2011, 12:24
Correct me if I´m wrong, but I dont think MiniVMac was meant to make use of real SCSI drives.
FusionPC, SoftMac and BasiliskII (some versions) could address Mac SCSI volumes on a PC host,
if that is what you are after.
FusionPC, SoftMac and BasiliskII (some versions) could address Mac SCSI volumes on a PC host,
if that is what you are after.
Still running: 7100/80 and iMac Bondi blue with a few SCSI peripherals.
- 24bit
- Joined: 26 Dec 2010, 21:28
Re: create/emulate SCSI drive using mini Vmac?
by bigmessowires » 29 Nov 2011, 17:15
True. The large disks in Mini vMac are actually implemented as super-sized floppies with a custom floppy driver. There is no SCSI emulation as far as I've seen from looking at the code.
-
bigmessowires - Joined: 21 Aug 2011, 03:45
4 posts
· Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 0 guests