Hi Everyone,
I think my 5500 is on the path to death. The CRT squeals and its stuck on a resolution of 640x480.
I tried a PRAM reset and that did not fix it.
5500 stuck at 640x480
3 posts
· Page 1 of 1
5500 stuck at 640x480
by IIfx » 04 Jun 2011, 00:31
Daily Drivers: Phenom II x4 desktop, Thinkpad x230
Quadra 800, IIfx, IIcx, IIsi, PM 5500-7100-8100-9500, G3 B&W, G4 QS, iMac G3 Bondi, Powerbook 170, 180, 540, 540c
Aperture Science - We do what we must because we can
Quadra 800, IIfx, IIcx, IIsi, PM 5500-7100-8100-9500, G3 B&W, G4 QS, iMac G3 Bondi, Powerbook 170, 180, 540, 540c
Aperture Science - We do what we must because we can
-
IIfx - Joined: 09 Jan 2011, 00:19
- Location: VA, USA
Re: 5500 stuck at 640x480
by kite210 » 07 Jun 2011, 03:32
I would suggest checking the analog board for any leaking caps, or cold solder joints.
My Collection:
Macintosh LC III, Macintosh Color Classic, Power Macintosh 6100/60, Power Macintosh 7100/66, Power Macintosh 8500/180 PowerBook G3 Wallstreet rev. 2, Power Macintosh G3 Blue & White, iMac DV 400Mhz Indigo, eMac (USB 2.0), PowerBook G4
Macintosh LC III, Macintosh Color Classic, Power Macintosh 6100/60, Power Macintosh 7100/66, Power Macintosh 8500/180 PowerBook G3 Wallstreet rev. 2, Power Macintosh G3 Blue & White, iMac DV 400Mhz Indigo, eMac (USB 2.0), PowerBook G4
-
kite210 - Joined: 03 Nov 2010, 05:13
- Location: Milwaukee, WI
Re: 5500 stuck at 640x480
by LC_575 » 15 Jun 2011, 04:42
And the flyback!
What happens when you attempt a different resolution?
What happens when you attempt a different resolution?
Lost all the Macs to Hurricane Sandy.
The '90's didn't end with New Year's 2000. They ended with the release of 9.2.2.
The '90's didn't end with New Year's 2000. They ended with the release of 9.2.2.
-
LC_575 - Joined: 02 Oct 2010, 21:10
3 posts
· Page 1 of 1
Return to PCI Power Mac & Performa
Who is online
Users browsing this forum: No registered users and 0 guests