Search results

If you have a g3 beige, I have a 4mb card available.

For what it's worth, can confirm rev A and B are interchangeable. If rev C is the same voltage and amps, you could make your own using an old iBook power adapter as long as you can find a suitable female plug end. I did this for a few months while waiting to find an original adapter for sale at...

I hope you are able to get to the bottom of this with your current board, but given that you have all of the other upgrades already, you could always source a replacement Rev 2 board pretty inexpensively!

My PB100 seems to have suffered some major screen damage over the past few years. When I got the pb in 2019, it was completely fine. Then last year I noticed a small discolored spot. And this year it has basically taken over most of the screen. I assume it's the typical vinegar syndrome and the...

I have a spare 7500 logic board that is working if you are interested/need it. Would only ask what I paid for it+ shipping. Feel free to DM me.

What's the approximate battery runtime on one of these post refurbishment? Just curious :)

First off, thanks to @jmacz for the repair work on this board. It's in WAY better physical and operational condition than when I first got it. After a busy week at work I finally had a chance to spend some more time testing this board. From a cold start (ie no power for over a couple hours)...

You can use any PSU from the other Duo machines, PB 1400, pb 3400, Kanga, G3 Wallstreet, Lombard, or Pismo. They are all compatible.

Yes, standard barrel jacks, typically 5V 1.0-2.0AMP.

Congratulations, enjoy! Looks like you got a pretty complete set!

Glad someone here got this! I actually asked the seller if they would ship to the USA a few days ago but they said collection only.

Hi All, I recently bought a Quadra 950 from someone on these forums. The computer was packed by UPS in a good box with plenty of bubble wrap and arrived without any external damage.  However, the computer just doesn't successfully power up. The seller says it worked perfectly before...

Here's a couple of pictures. I have the original box so that's why I believe it came that way from the factory. Never knew this was an option, any other dual floppy SE I've seen has been 800K. Anyhow, got around to swapping parts around today. Replaced the logic board,  metal frame (old one was...

Hi All, I recently purchased a Mac SE Dual Floppy model on eBay because the case was in very good condition. The seller said it didn't power on, but this was vague so i bought it anyway to see if I could figure out what might be wrong. Well, it suffered the all-too-common red battery explosion...

Wow, it's like someone dumped a whole vacuum bag of dust on that!

The hard drives are SCSI 3.5", 50 pin. If I recall someone did make an adapter for IDE drives, but it was pretty expensive. I think you'd be better off just picking up a used SCSI drive somewhere.  The laser printer cable is likely just an 8 pin serial cable. It will resemble the keyboard cable...