Search results

Hi @maceffects +1 for a SE board if you can keep me in mind, although where are you re. shipping? I'm UK. Cheers!

@olePigeon good shout I'll get some switch cleaner in there (never seen Dioxit in the UK). Thanks! @croissantking really useful. I'll have to sooner or later but sooo many caps! 😥

Oh yes for sure it has other problems, but this is much better. Need to track down a line output transformer.

Afraid not, only a small Amount of adjustment available, perhaps could change for a different value ?

Ah brilliant thank you, there was a little bit of anti-clockwise movement. Made it much more useable 🙌

Is it this one at the top? seems to adjust focus but got it as good as it can. I've not taken it apart yet

thanks for considering it @imactheknife, the adjustments at the back are all position and width/height. One on the side controls is brightness the other is contrast, turning brightness does nothing, wonder if it's the pot? but they don't break, do they? Actually turning the brightness dial makes...

(y)

Yes this is as good as the brightness/contrast can get, the back adjustments don't affect the washed out look

What were your symptoms pre re-cap? I've got a contrast and blur issue posted an image here: https://68kmla.org/bb/index.php?threads/13-hi-res-monitor-softness.47083/

Hi all, I've had the 13" trinitron in to get looked at, there's a slight improvement but still some kind of offset, low contrast and softness. The TV guy said it needs a new line output transformer, but can't source one. Any other opinions on this? considered a re-cap perhaps? n.b. the pink...

Thank you!

Nice job! I've considered doing mine, its a lot of caps isn't it? Do you have a list at a all ?

Pretty simple as I recall, this is helpful . then just follow Fallen6 method above. The breaks can be very very small.

I didn't, I had the new board to jumped right in to replace 🛠️

Done! new hybrid from Supesvga and now running happily from battery. Not easy to get out cleanly but took my time, had to chop the old one up but all ok. Big shout out to @SuperSVGA and @androda for their hardware projects for the portable 🙌

Good shout Brooklyn, I checked it was sending current to the battery terminals when depressed so guess that would be working?

Thanks @alexGS that's good detail (y)

Thanks alexGS, that's very encouraging. Good solution, was thinking solder wick and then heat gun, but there's a lot of bits that might go awol! Need to get a hybrid replacement first though

Hi @GRudolf94, yes recapped last year. Maybe have to get the mb out and test the hybrid board. Thanks!