-
Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.
Ttpilot's latest activity
-
Ttpilot replied to the thread 1.4mb floppy ejection.Yes, I also swapped out the SWIM chip. As to altering the head alignment, I don’t think I did. I’ll be repeating the process on the... -
Ttpilot replied to the thread 1.4mb floppy ejection.The machine is an SE, but I swapped the ROMs and drive from an SE FDHD. When I got the FDHD I used the hard drive and the floppy in my...
-
Hi all, unlike the usual problem of disks not ejecting, my SE is ejecting floppies as soon as they’re inserted. The drive snaps it in...
-
Ttpilot replied to the thread Stuck Miniscribe.I installed a SCSI Blue, which works fine. I'm hunting for one of the brackets which would mount it to the expansion slot in the back of...
-
-
Ttpilot replied to the thread Stuck Miniscribe.No luck. I don’t think the motors are getting power
-
Ttpilot replied to the thread Stuck Miniscribe.Follow up: I hooked the LED to the drive and tried to power it up. It would not spin up, and the stepper motor didn’t do anything...
-
Ttpilot replied to the thread Stuck Miniscribe.Yup. I was able to rotate the spindle flywheel with no trouble, so I’m assuming the heads are free (or torn off already lol). I’ll...
-
Ttpilot replied to the thread Stuck Miniscribe.Thanks, this helps a lot. I hadn’t run across this video when I searched
-
Ttpilot replied to the thread Stuck Miniscribe.I plugged into power from a pc (the SE is still disassembled) but it wouldn’t spin up. I just wondered if it needs to also be plugged...
-
Hello. Dumb question: I picked up a Mac SE recently. At the moment I’m working overhauling the floppy drive, but the Miniscribe 8425SA...
