Recent content by macuserman

@Phipli this seems right up your alley.

That's a fun site, he also wrote an article about the development of the ultra rare 400mhz G3 card for the 2400. https://macmem-com.translate.goog/wp/2019/08/04/9225/?_x_tr_sl=ja&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=wapp Also I fixed your link so that it is already translated. ;)

I've got a real nice Pismo I've been fixing up but I'm having a couple odd issues with it. I'm looking for some advice, there are two main issues I'm struggling with. 1. The bottom ram slot refuses to work with a 512mb memory stick. I get boot errors everytime. The 128mb stick works great, but...

What kind of heatsink are you using/how is it being held in place? Is it possible that it is not staying seated correctly after being installed? I'm not sure how you are securing it, but that could be part of your issue.

I have not, but I have a couple of these, so I'd love to hear how it goes.

I have a dead, TI 4600 mac edition, believe it suffered from the typical fate of having the crappy OEM fan fail and then cooked itself. No visible damage though, if you want it for reference or to steal parts off of, I'll be willing to let it go relatively cheap, I intended to try to fix it but...

I have to admit I haven't used the Zulu in the Quadra for long sessions, but I have used it a fair bit and have not been experiencing issues with my general use although I haven't sat down and used a bunch of software on it. I mostly do a lot of testing of various hardware so lots of changing...

I like to shave the little bit they snap over on the machine down a little so the tab doesn't have to flex as much when putting them on. And I never take them off once they are on.

My plan is to just hoard bezels for them. :LOL: I might currently have the largest stash of bezels for that style, although someone is welcome to challenge my self appointed title. :LOL: :LOL:

That is very slick actually, surprised nobody has thought of that before. Nice fix!

New to me! Quite pleased bought it sold as is untested and it works!! $100 well spent. Now to spruce it up a little and fix that screen! Cosmetically it’s quite good, does need a battery I saw a rebuild thread around here somewhere may give that a go.

Yes! I love these displays, I have two of them that I use as well. They are gold, they work with almost everything, haven't run into anything yet that didn't work with them so far.

Yeah 1.2 generally works without any patching. However there isn't really anything you can do at this point besides take it back apart to see if you can spot an issue.

Hey thank you! That is super helpful! I'll definitely give that a try!

I for one would dance on a table for a USB C updated version. :LOL: